Yeni Iveco Daily Devirmeli araç 70C18 4x2 Mazot Türk Lirası 6 vinç
Acil- 5 M³
- 7 Ton
- Gdańsk
|
Başlıca bilgiler
|
|
|---|---|
| Site referansı: | 10664437 |
| Karoseri | Devirmeli araç |
| Marka | Iveco |
| Ürün serisi (marka : Iveco) | Daily |
| Model | 70C18 |
| Durum | Yeni |
| İlk plaka alım tarihi | 16/07/2026 |
| Ülke | POLONYA |
| Üretici | Iveco |
Malzemenin durumu |
|
|---|---|
| Enerji | Mazot |
| Ülke (ürün serisi) | POLONYA |
Yardımcı Vinç |
|
|---|---|
| |
| Bom ucunda kaldırma kapasitesi | 1.12 Ton |
| Yük kapasitesi | 2700 Kg |
| Çalışma yarıçapı | 3.6 metre |
Süspansiyon/Akslar |
|
|---|---|
| Dingiller | 4x2 |
motor |
|
|---|---|
| Güç | 176 Beygir gücü |
| Silindir hacmi | 2998 cm3 |
Ebatlar |
|
|---|---|
| Alan | 8.15 m² |
| Hacim | 5 m³ |
Donanım Ticari araç Iveco |
|
|---|---|
|
Tamamlayıcı bilgiler Iveco 70C18 |
|---|
|
Özellikler Iveco Daily - Vinç |
|
|---|---|
| Sürüş | Direksiyon solda |
| Avrupa Normları | Iveco Türk Lirası 6 |
| Kilometraj | 16 Km |
| Hazne kapasitesi | 115 L |
Kutu boyutları |
|
|---|---|
| Kutu iç yüksekliği | 0.6 metre |
| Kutu iç genişliği | 2.25 metre |
| Kutu iç uzunluğu | 3.62 metre |
Şanzıman ve aktarma organları |
|
|---|---|
| Vites kutusu | Klasik vites kutusu |
Tonaj |
|
|---|---|
| Toplam sürüş ağırlığı | 7 Ton |
Kabin donanımı |
|---|
|
Hatırlatmalar |
|---|
|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
|
Tümünü görüntüle
|
Hatırlatmalar |
|---|
|
dump truck + crane, brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
|
Başlıca bilgiler
|
|
|---|---|
| Site referansı: | 10664437 |
| Karoseri | Devirmeli araç |
| Marka | Iveco |
| Ürün serisi (marka : Iveco) | Daily |
| Model | 70C18 |
| Durum | Yeni |
| İlk plaka alım tarihi | 16/07/2026 |
| Ülke | POLONYA |
| Üretici | Iveco |
Malzemenin durumu |
|
|---|---|
| Enerji | Mazot |
| Ülke (ürün serisi) | POLONYA |
Yardımcı Vinç |
|
|---|---|
| |
| Bom ucunda kaldırma kapasitesi | 1.12 Ton |
| Yük kapasitesi | 2700 Kg |
| Çalışma yarıçapı | 3.6 metre |
Süspansiyon/Akslar |
|
|---|---|
| Dingiller | 4x2 |
motor |
|
|---|---|
| Güç | 176 Beygir gücü |
| Silindir hacmi | 2998 cm3 |
Ebatlar |
|
|---|---|
| Alan | 8.15 m² |
| Hacim | 5 m³ |
Donanım Ticari araç Iveco |
|
|---|---|
|
Tamamlayıcı bilgiler Iveco 70C18 |
|---|
|
Özellikler Iveco Daily - Vinç |
|
|---|---|
| Sürüş | Direksiyon solda |
| Avrupa Normları | Iveco Türk Lirası 6 |
| Kilometraj | 16 Km |
| Hazne kapasitesi | 115 L |
Kutu boyutları |
|
|---|---|
| Kutu iç yüksekliği | 0.6 metre |
| Kutu iç genişliği | 2.25 metre |
| Kutu iç uzunluğu | 3.62 metre |
Şanzıman ve aktarma organları |
|
|---|---|
| Vites kutusu | Klasik vites kutusu |
Tonaj |
|
|---|---|
| Toplam sürüş ağırlığı | 7 Ton |
Kabin donanımı |
|---|
|
Hatırlatmalar |
|---|
|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
|
Tümünü görüntüle
|
Hatırlatmalar |
|---|
|
dump truck + crane, brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
Standart Iveco Daily 35C11
Devirmeli araç Renault Master
Devirmeli araç Iveco 35s18
Devirmeli araç DAF LF 180